ANDREWS EV-27 CAM EVO

ANDREWS EV-27 CAM EVO

The go to cam for FXR's! Excellent broad torque and horsepower powerband. Best overall bolt in cam for 80"+ engines with stock or higher compression.

• Nice gallop sound at idle
• These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float
• Bolt-in street cam with fast open and close ramps
• Uses stock springs; works with carbs or fuel injection
• Pulls from 1500 to 5500 rpm
• Similar timing to EV3, but designed to produce a very broad torque band
• Must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
• We highly recommend upgrading the factory prone to failure cam bearing while installing this. A cam shim kit is also recommended!
• Made in the U.S.A.

Hunting down a specific cam? We have more options in store! give us a call at 602-788-0364 or email us at Info@ramjetracing.com

Fitment :

• '84-'99 Evolution big twin

Intake:

• Valve Lift: .495
• Open: 20 degrees
• Close: 36 degrees
• Duration at .053: 236 degrees
• Lift at TDC: .182

• Valve Lift: .495
• Open: 46 degrees
• Close: 14 degrees
• Duration at .053: 240 degrees
• Lift at TDC: .166

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION-CONTROLLED MOTOR VEHICLES.

IF FOR RACE OR OFF-HIGHWAY USE OUR CA EXHAUST WAIVER WILL NEED TO BE SIGNED AND RETURNED PRIOR TO SHIPPING. 

CALIFORNIA CARB WAIVER AVAILABLE HERE:

https://cdn.shopify.com/s/files/1/0157/0363/8064/files/CA_CARB_Waiver.pdf?573